Huller and Shaker(Decordicator)

For Cleaner decortications with absolute minimum of oil absorbed in hulls. Shaker separator provides efficient separation of meats and hulls 

 
The huller removes the tough seed coat with a series of knives and shakers. The knives cut the hulls (tough outer shell of the seed) to loosen them form the kernels (the inside meant of the seed, rich in oil) and shaker separate the hulls and kernels. The kernels are ready for oil extraction and the hulls are sent to storage to be sold for livestock feed.

 
The Perfection huller represents the best all roung design for cutting cotton seed and other Oil beaing seeds. The Machine consists of a rotation cylinder carrying 17 rows of knives passing a concave holding rows of stationary knives.

 
The latest desing desingated as the “Central Concave Model “ embodies changes per feeting the

Following features

1. Minimum Oil Absorption
2. Simplicity of adjustment.
3. Maximum safety of operation
4. Low repair costs

The concave is pivoted on fixed points and remains in perfect aligment with the cylinder . The only adustment on huller is the eccentric shaft on the concave. This adjusts the stainoray knives to and form the rotatin knives on the cylinder.

The position of the stationary knives and the pivot point of the voncave are such as the make the huller very sentitive to foreign matter. If a piece of foreigh material enters the huller large enough to cause demage the safety studs holding the concave in position are immeditely broken ,allowing the concave to fall open and be held by stop chain.

The Cyclinder is  carried in extra heavy ball bearing boxes located outside the body of the machine. The cyclinder is dynamically balanced to run free form vibration. The perfection huller knife is rectangular in section . By revesing the knife and turning it over at intervals all four edges can be used for cuttings.

The Combination of MITSUN Perfection Huller Mounted on MITSUN Shaker Separator wil reduce abssorption loss to a minimum. This is due to the clean cutting action of the huller and the efficient seperation of meants and hulls by the shaker.